Bronze Heat Exchanger Parts

With the advanced production equipments and informationalized management, we produce OEM Bronze Heat Exchanger Parts strictly based on industrial standards and technique. The custom heat exchanger parts are designed to remove thermal energy from the exhaust gas of natural gas, compressed air, hydraulic oil and transfer it to the water circuit. The extracted heat can be used for space heating, domestic hot water and any industrial process that requires hot water.

Hengchang use sand casting process to produce bronze parts. Sand casting uses resin-bonded sand to construct a mold that the bronze will be cast into. When the mold is cured and the pattern is removed, you can flow molten bronze into the hollow area. Once it cools, the result is a single cast metal object.

Casting Process

1)Make the pattern

2)Make the sandbox

3)Push the pattern into the sand and clay mixture

4)Remove the brass from the furnace

5)Pour the molten brass into the mold 

6)Wait for the brass to cool

7)Cold bathe the mold

8)Remove the mold from the sand using heat-safe gloves

Bronze & bronze alloy casting:

- weight: 0.5-20kg

- technology: resin sand, shell molding

- application: coal industry, chemical industry, textile industry

Our Inspection Way

1) Spectrographic and manual quantitative analysis

2) Metallographic analysis

3) Brinell, Rockwell hardness inspection

4) Mechanical property analysis

Sample and pilot run will be given 100% inspection during production and before shipment. A sample check for mass production according to ISDO standard or customer requirements will be verified.

Our Advantages in Sand Casting Field:

• Over 15 years of experience in sand casting, shell molding casting and machining technology.
• Dimensionally accurate cores for complex internal contours.
• Strictly control the raw materials.
• Quality management throughout the production process and maximum process reliability.

Zhangzhou Hengchang Machinery Manufacturing Co.,Ltd OEM Brass Parts